Please note: the length of filter is about 100mm. The diameter of filter is about 6-10mm.
Color: white, pink, green
Working voltage: DC 5V
Material: silicone/PP/ABS/Electronic component
Amount of spray:40ml/h
Working current: 400mA
Water tank capacity: 220ml
Use time: 5-10h
Power supply: USB
Applicable area: 10-20 square meters
Noise: less than 36dB
1. SUPER QUIET: Runs quietly. It would not be disruptive while you sleep
2. Large capacity,dry protection, infiltration and Moisturizing
3. Automatic power failure protection,anti-dry
4. Mini size, lightweight and compact, easy to carry
Notes: Before work it is necessary to wet the filter in the water completely. If the mist is significantly reduced, you need to replace the cotton swab.
1. Do not puncture the atomizing film of the spray port! ! !
2. Before using it for the first time, please take out the cotton swab (note that the spring underneath is not lost), soak it in water for 1-2 minutes, and let the cotton swab fully absorb water before installing it for use.
3. Only tap water or mineral water can be used, not pure water (it will affect the fog effect)
Usage and function:
1. Turn on the power, press the button lightly to turn on the continuous spray mode, click the button again to turn on the intermittent spray mode (spray for 4 seconds and stop for 6 seconds), press the third time to turn off.
2. When it is turned on, press and hold the button (without letting go) for two seconds to turn off the night light (seven colored lights), and then long press to turn on the night light.
3. All spray modes are set to automatically power off after 3.5 hours and can be restarted to continue using.
4. For the first use, fill up with water (about 90%) and let it stand for 3-5 minutes before turning it on.
1pc usb cable